Functional Part
Display front view
Open power on
Place display in the suitable place and plug the power cord into AC alternating power( input voltage AC220V)
50/60hz socket, the other part into display power socket, open "on/ off" switch, then the power indication
light becomes red, display is in "standby" mode, if pressing on/ off button on the remote controller, or press
on/ off on bottom front panel, the indication light will become blue and display image will appear after waiting
for a few seconds.
Shut off the power
Press power button and make the display in "standby" status or shut off the off switch, then take out the power
plug from socket.
Note:
If the display is not in use for a long time, please shut off the display's power and take out its plug from socket.
Back Cover Display Port
Note:
Please take care when connecting to other equipment
Please read the user's manual of outer equipment when connecting the external equipment
Please cut off the power between the display and equipment to ensure the correct connection between input and
output terminal.
6