Table of Contents
Advertisement
Installation
Battery installation
1. press the battery back cover of remote controller and slide downwards
2. Put 2 batteries 1.5V(AAA spec.), ensure placing its pole (+/-) correctly with the indication on the remote controller.
3. Slide and fix the back cover well until hearing a "tick" sound.
Pay attention when using the battery
Please do not use new ones with old batteries
Please do not use different types of batteries together (for example "manganese" and "Alkaline" ones.
Note there are chargeable and non-chargeable 2 kinds of batteries, please do not try the non-chargeable
ones for recharging.
If remote controller is not used for long time, please take out of the batteries.
Please do not throw batteries into the fire in case of explosion of its vented liquid.
Please send old batteries to special recycling bureau in case of polluting environment
Pay attention when using the remote controller
Please do not drop remote controller
Avoid remote controller to suffer from physical crush
Please place remote controller under cool. dry environment as humidity will easily cause failure
When power supply of the battery is not enough, please change it on time.
Accessories equipped with the display
Power cord (1.8M)
HDMI wire.
Touch wire (without OPS computer)
Remote controller
Touch pen
User's manual (with warranty card)
Certificate
Note:
We reserve the right to adjust the accessories because of different batches.
The effect chart is for reference, please refer to the actual product.
5
Advertisement
Table of Contents
