superbrightleds FLCCT Series User Manual

Important: Read all instructions prior to installation.
Selectable CCT LED Flood Light
Safety and Notes
• Product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the fixture. Failure to properly support fixture may result
in damage or injury, for which the manufacturer does not
assume responsibility.
Specifications Drill
Model FLCCT
Beam Angle
Operating Temperature
Environmental Rating
Dimming
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Color Temperature Selection
Loosen screw on CCT selection switch cover to
access switch. With the light powered on, press
switch to cycle through CCT options. Re-tighten
switch cover screw.
SW3515-SH8BRU SW3530-SH8BRU SW3550-SH8BRU
-4°–122° F(-20°–50° C)
none
cover screw
selection
switch
Wall
SW3570-SH8BRU
Nema 7x6 (115° horizontal x 85° vertical)
IP65
Wiring Diagram
Rev Date: V0.1 01/21/2020
4400 Earth City Expy, St. Louis, MO 63045
User Manual
FLCCT Series
FLCCT-SW3530-SH8BRU
SW3590-SH8BRU
-40°–122° F (-40°–50° C)
1–10 V
Line
Line
L L
L L
Neutral
Neutral
N N
N N
Ground
Ground
GND GND
GND GND
Dim (+)
Dim (+)
+ +
+ +
Dim (-)
Dim (-)
- -
- -
866-590-3533
Black
Black
White
White
Green
Green
Purple
Purple
Gray
Gray
superbrightleds.com