superbrightleds WPR-NW40 User Manual

Important: Read all instructions prior to installation.
Rotatable LED Wall Pack
Conduit Mounting Installation
1. Remove power from circuit.
2. Loosen 2 screws with 4mm Allen wrench
on bottom of light. Remove Bracket from
back of light.
3. Drill 4 holes on the wall using outer-most
holes on bracket as a guide. Drive wall
anchors into holes. Attach mounting
bracket to wall using 4 screws (not
provided).
5.50in
139.69mm
4. Remove knockout from either side of light. Pull wires from conduit
4.90in
through knockout. Attach conduit onto light. Make wire connections to 124.45mm
main supply.
3.15in
80mm
5. Mount light on bracket. Tighten 2
screws with 4mm Allen wrench on
bottom of light. Swivel aimable light
bar to desired position, and tighten
lock screw with 2mm Allen wrench.
Rev Date: V1 10/13/2017
User Manual
Part Number:
WPR-NW40
WPR-NW80
5.50in
139.69mm
4.90in
124.45mm
3.15in
80mm
Rotatable LED Wall Pack
User Manual
Part Number:
WPR-NW40, WPR-NW80
Rev Date: V1 10/13/2017
5yr