Installation; Choosing The Right Location - Panasonic NR-BS53VX3 Operating Instructions Manual

Installation

Installation

Choosing the right location

Install the refrigerator in a location which satisfies the
following criteria:
● Where there is a main water supply line nearby
● Where the refrigerator will not be exposed to direct sunlight
● Where the refrigerator will be at a distance from heating appliances, cooking
appliances and other sources of heat
● A location which is well-ventilated and dry
● Where the floor is sturdy and level
Place a solid board underneath if the refrigerator is to be installed on top of a carpet
or vinyl floor.
The board will protect the floor from becoming deformed and discoloured.
Provide clearance to allow heat to dissipate
Residual heat is always being emitted from the refrigerator while it is operating.
Provide sufficient clearance around the refrigerator to allow this heat to dissipate so
that its cooling ability is not impaired.
Dimensions (mm): W915 × D710 × H1860
Installing the spacers
Install the spacers on the back panel of the refrigerator to ensure the minimum
amount of space required to allow the heat generated by the refrigerator.
Attach to the back panel of the refrigerator after
removing the double-sided tape's release liner.
When the doors are completely open
353 mm
6
910 mm 430 mm
1693 mm
50 mm or more
Spacer (accessory)
When the inside drawers have been taken out
322 mm
30 mm or more
25 mm or more
Spacers
910 mm 388 mm
1620 mm