Snmp - Asus GigaX 2008EX User Manual

[Reload]
Restores the previous saved settings from configuration file.
CLI command: l2 cos retrieve

5.3.4 SNMP

[Community Name] [Set]
A community entry contains a community description string and a set of
privileges. Get privilege are turned on by default, and user can specify whether
to give it the Set Privilege while create a new entry.
CLI command: snmp community add
New community string: <new community string>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for ʻyesʼ; n for ʻnoʼ>
User can modify a community entry in the table by reassigning its community
string and privileges.
CLI command: snmp community set
Community entry (table index): <entry id to config>
Community string (old community string): <new community string>
This action will modify all hosts with community string from ʻold communityʼ to
ʻnew communityʼ.
Are you sure? (y/n): [y] <y for ʻyesʼ; n for ʻnoʼ>
Get privileges: [y, always turn on by default]
Set privileges? (y/n): [n] <set privilege, y for ʻyesʼ; n for ʻnoʼ>
Allows user to delete a community entry from community table.
CLI command: snmp community delete
Community entry (table index): <entry id to delete>
This action will delete all hosts in community string with ʻdelete communityʼ.
Are you sure? (y/n): [y] <y for ʻyesʼ; n for ʻnoʼ>
[Reload]
Restores the previous saved settings from configuration file.
CLI command: snmp community retrieve
[Host IP Address] [Community]
GigaX2008EX L2 Managed Switch User Manual
43