Vibration Alert Settings; Out Of Range - LG TONE PLATINUM User Manual

Fast Rewind/Forward
Change Equalizer Mode
Switching Music Players
If you stop in the middle of playback and then play music on either of the two connected devices,
the HBS-1100's music playback and control changes to that device.

Vibration Alert Settings

Slide and hold the Volume jog switch in the volume up (+) direction for 2 seconds when the
HBS-1100 is not in use.
If you turn off the vibration alerts, it will not vibrate even when a call is being received or you are out
of communication range.
NOTE: The vibration alert is automatically set to the ON when you turn on the power.

Out of Range

If the device connected to the product is out of effective communication range (33 feet / 10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the Call button on the product
to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost.
In this case, the automatic reconnection function is not supported.
Slide the Previous/Next jog switch in the
the desired section of the track.
Briefly press the Play/Pause/Stop button twice. Changes modes with a
beeping sound in the following order: Bass Boost (default) > Tone Platinum
> Treble Boost.
NOTE: The Tone Platinum mode is an EQ mode optimized for the BA unit
used in HBS-1100.
or direction until you reach
9