P3 Programme; How To Change A Programme; Towel Dryer Mode - IKEA NUVARANDE Manual

P3
The "P3" programme already has preset suggestions
for days and hours, but if you want to customise this
you can perform the changes according to your needs:
you can choose different temperatures ("COMFORT"
and "ECO NIGHT") over a 24 hour period for each day
of the week.
Customized Suggested
program P3 hours
From Monday to 0 – 6
Friday
6 - 9
9 - 13
13 - 23
23 - 0
Saturday and 0 - 7
Sunday
7 - 23
23 - 0

How to change a programme

Starting from the display that shows
the current programme, press "OK" for
5 seconds
The "CHRONO" mode icon starts to
flash
Press the "MODE" and "-" keys together
for 5 seconds until the Programme
icon "P" start to flash
With the "+" or "-" key, select the
desired new Programme
Press "MODE" to confirm
Once the new programme is selected,
the "ASC" icon appears. Press the "-"
key to deactivate or the "+" key to
activate the "ASC" function
Suggested Personalised days and hours
mode
ECO NIGHT Select your preferred mode and temperature.
COMFORT
ECO NIGHT
COMFORT
ECO NIGHT
ECO NIGHT
COMFORT
ECO NIGHT
Setting the P3 programme
Following the previous instructions, select the P3 icon
to customise the programme.
To modify or change the "P3" operating programme:
starting from the "P3" clock display, press "OK" for 5
seconds. The clock starts to flash and the week can be
programmed again as explained before.
Towel dryer
When the appliance works in "TOWEL DRYER" mode,
its functionality is to dry towels and it becomes hotter
where more heat is needed and this heat distribution
depends on where towels have been hung. This mode
is ideal when you do not want to heat the entire room.
Once the "P3" programme is selected,
the "ASC" icon appears.
Press the "-" key to deactivate or the
"+" key to activate the "ASC" function.
Press the "OK" key for 5 seconds.
The clock will show the time being
programmed.
Starting from day 1, select each
hour with the '+' and '–' keys, and for
each programme choose between
"COMFORT" and "ECO NIGHT"
temperature by using the "MODE" key.
Once finished setting the operation
for the hours of the first day, press the
"OK" key to confirm the choice. Repeat
this procedure for the other days.
After programming all the days, press
"OK" to submit final confirmation. The
weekly programme is now set.
11