Table of Contents
Advertisement
Chapter 2
Wake Up on LAN/Ring
If you highlight the literal "Press Enter" next to the "Wake Up on LAN/Ring" label
and then press enter key, it will take you to a submenu with the following options:
Power On by PCI card
When you select Enabled, a PME signal from PCI card returns the
system to Full On state.
The Choices: Disabled (default), Enabled.
Wake Up on LAN/Ring
An input signal on the serial Ring Indicator (RI) line (in other words,
an incoming call on the modem) awakens the system from a soft off
state.
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled,
Choose the Date and Time Alarm:
Date (of Month) Alarm You can choose which month the system
Time (hh:mm:ss) Alarm You can choose shat hour, minute and
Note: If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work.
Reload Global Timer Events
Reload Global Timer Events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything, which occurs to a device,
which is configured as Enabled, even when the system is in a power down mode.
Primary IDE 0/1
Secondary IDE 0/1
FDD, COM, LPT Port
PCI PIRQ [A-D]#
will boot up.
second the system will boot up.
2-26
BIOS Setup
Advertisement
Table of Contents
