Table of Contents
Advertisement
Chapter 2
CPU L1 & L2 Cache
This option allows you to enable or disable the CPU L1 & L2 Cache which improve
performance.
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Enabled (default)
Disabled
First /Second/Third/ Boot Other Device
These BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Enabled, Disabled (default).
Boot Up Floppy Seek
Enabling this option will test the floppy drives to
tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled.
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Enable quick POST.
Normal POST.
HDD-3, ZIP100, LAN, Disabled.
determine if they have 40 or 80
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
2-10
BIOS Setup
Advertisement
Table of Contents
