Electronic Signal Processing; Model 3411 - Torque Display - Magtrol TM Series User Manual

INSTALLATION / CONFIGURATION

2.6 ELECTRONIC SIGNAL PROCESSING

Magtrol offers electronic processing units that collect signals from its transducers and displays them on an
LCD screen. These units have also been designed for digital processing of the measured values.

2.6.1 MODEL 3411 - TORQUE DISPLAY

The MODEL 3411 - Torque Display processes the torque and speed signals, displays the measured torque
and speed values, and displays the calculated power value.
With its USB interface, data can be sent to a computer for processing with the LabVIEW™-based TORQUE
Software that is supplied with each MODEL 3411 - Torque Display.
.
NOTICE
24
Computer with
TORQUE Software
Fig.2-15 PC-Based System Configuration with MODEL 3411 - Torque Display
For additional information regarding the operation of the MODEL 3411 Torque display, re-
fer to the corresponding user's manual (available online at www.magtrol.com).
Fig.2-14 MODEL 3411 | Torque Display.
POWER TORQUE SPEED
1
0
TORQUE PULSE DISPLAY POWER SYSTEM
MODEL 3411 SCALE PER REV UNITS UNITS SETUP
TORQUE DISPLAY
MODEL 3411
Torque display
DOUBLE POLE FUSING
ETHERNET USB TORQUE SPEED TRANSDUCER
36 VA 50/60 Hz
85-250 VAC INPUT
FUSE: IEC T 500mA L 250V 5x20mm
ENTER
RESET
TARE
TARE
TM Series
Torque Transducer
TM
series