First Time Setup - Best Tugs BRAVO 5 User Manual

First Time Set Up
NOTE: Quick Lock Fork and Wheel Chock Kit
Setting Up the Quick Lock Fork
If equipped with the standard ramp
TIP: It is easier to set up your QLF
if you give yourself plenty of slack in the
1. Right Fork - Push the spring-loaded locking
slide on the right fork of the QLF to the left
until it locks into place. It is locked when the
slide does not return to the open position
on its own. (FIG 7) To release the slide, lift
the drop pin and allow it to return to its
original position.
2. Place the QLF over/in the nose gear
connection.
3. Left Fork - Lift the drop pin on the left fork
and rotate the slide until it fits firmly against
the nose gear. (FIG 8) The less slop and
wiggle, the better. Once the slide is fitting
snugly, release the drop pin and continue
twisting until it falls into place to lock the
slide. See FIG 10 and FIG 11.
Setting Up Wheel Chock
The wheel chock drops into the loading
tray between the two brackets. Line up
the holes on the RGA with the bracket
holes in the loading tray and insert the
pin. Make sure both ends of the pin are
visible and fully inserted. (FIG 12)
(QLF/Wheel Chock Kit)
ARE NOT USED TOGETHER
strap.
FIG 7
FIG 8
FIG 9
8