Ironing; After Ironing - Unold 75025 Instructions For Use Manual

Safety lift
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14

ironing

General instructions: Please check the ironing temperature indicated for the corresponding fabric
before you start ironing. In case of doubt, prove the right adjustment on a non-visible part of the
clothing. In order to avoid that delicate fabrics become shiny, always iron these clothes from the
left side.
1. Prepare the appliance by filling the water
tank as described in the chapter „Filling the
water tank".
2. Turn the material selector (5) to the desired
fabric to iron.
3. The indicator light flashes green and
indicates that the heat up process of the
appliance is finished.
4. As soon as the indicator light shows a
permanent green light you may select the
steam type: move the steam selector button
(4) to the desired steam type. The use of the
steam or steam burst feature is only possible
with wool, cotton and linen fabrics.
5. The iron produces steam as long as it is
lowered. If you desire to switch off the steam
feature, please adjust the steam control to
.
6. As soon as the iron is lifted by the Safety-
Lift feature, the steam feature is activated.
As soon as you continue ironing, the iron
re-establishes the desired steam feature.
7. Spray mist feature: (A)
Press the spray mist feature button (3) to
eliminate cuttlings.
8. Steam burst feature (B):
Press the steam burst button (2) when a
strong steam burst is needed on the soleplate
of the iron. This feature eliminates even
persistent cuttlings/tuckings. This feature
is only available for wool, cotton and linen.
Please wait approx. 3 seconds between one
steam burst and another.

after ironing

1. allow the appliance to cool off before cleaning
it or store it.
2. Before cleaning and storing, always turn the
appliance off and unplug it from the wall
socket.
3. When disconnecting the plug from the wall
socket, do not touch the appliance as in this
case the Safety-Lift mode is not activated.
4. The iron should always be stored with the
Safety-Lift device extended in order to
18
9. Vertical steam (C):
Press
the
steam
maintaining the iron in a vertical position.
This allows you to eliminate cuttlings from
cloths on coat hangers or curtains. Please
wait approx. 3 seconds between one steam
burst and another.
10. Never iron clothes when put on. Danger of
burns! In case you want to iron clothes in a
vertical position, please hang them on coat
hangers.
11. You may also use the iron without steam. In
this case simply adjust the steam selector
.
button to
A
B
C
avoid the generation of water drops on the
soleplate.
5. Discharge the water from the water tank. To
do so, just open the feed opening and tilt
the iron over a washbasin or sink until the
water runs out.
6. To store the appliance, wrap the cables
loosely around it after it has cooled off.
burst
button
while

Advertisement

Table of Contents
loading

This manual is also suitable for:

75014

Table of Contents