Before First Use; Easy Steps To Ironing; Filling The Water Tank - Unold 75025 Instructions For Use Manual

before firSt uSe

1. Remove all packaging material and any
transport safety devices.

3 eaSy StepS to ironing

Open the feed opening
and fill the water tank
with water up to the
MAX mark.

filling the water tank

Normal tap water may be used. If you live in a region with hard water, we recommend to use Mineral
water or to mix tap water and distilled water in equal parts. Never use pure distilled water as this
may damage the appliance!
1. Unplug the appliance from the wall socket.
2. Adjust the steam selector button to „AUS/
OFF".
3. Open the feed opening of the water tank
(10).
4. Fill the measuring cup delivered with water.
2. Also remove the cardboard that might cover
Connect the plug to a
wall socket, select the
desired type of fabric
and the steam type.
5. Mind bringing the iron in a horizontal posi-
6. Carefully fill the water tank with water.
7. Do not exceed the MAX mark.
8. Close the feed opening by pressing slightly
9. Connect the plug to the wall socket.
10. The indicator light lights up red.
11. If you have to refill the water tank while
12. Make sure that the iron is heated up, before
the ironing soleplate.
When the indicator light
stays green you can
start ironing.
tion.
until the lid latches into place.
ironing, unplug the appliance from the wall
socket and repeat the aforementioned steps.
Take special care when filling the water tank
from the tap, in order to avoid burns and
possible damages to the washbasin or the
sink.
starting ironing again.
17