Required Tools - SimLab P1-X Instruction Manual

Thank you for purchasing a Sim-Lab P1-X sim racing chassis! On
the following pages you will find a detailed instruction howe to build
this cockpit. Assembling requires a set of simple tools, and general
knowledge of how to use them and a bit of technical insight.
There are 12 Variant of the P1-X sim racing cockpit. Every variant is
covered in this manual. Take care to find the illustrations that are
applicable to the one you chose. Generally it takes about 3-4 hours
to build this cockpit. Before starting please check contents and
make sure all the parts are accounted for in the packages.
BOX A (Profile kit)
BOX B (Hardware kit)

Required tools:

5/6 mm
BOX C
(Pedal tray)
11 mm
BOX D
(Feet)
2