Biostar I915P-A7 Bios Setup Manual page 25

1915P-A7 BIOS Manual
6.1 ACPI & WAKE UP EVENTS
6.1.1 ACPI Function
This item displays the status of the Advanced Configuration and
Power Management (ACPI).
The Choices: Enabled (default), Disabled.
6.1.2 ACPI Suspend Type
The item allows you to select the suspend type under the ACPI
operating system.
The Choices: S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR
6.1.3 Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA
card when system wakes up from S3 state. The system time is
shortened if you disable the function, but system will need AGP driver
to initialize the card. So, if the AGP driver of the VGA card does not
support the initialization feature, the display may work abnormally or
not function after S3.
The Choices: Auto (default), Yes, No.
6.1.4 Wake-Up by PCI card
When you select "Enable", a PME signal from PCI card returns the
system to Full On state.
The Choices: Enabled, Disabled (default).
24