ELECTRONIC CASCADING ACCESSORY
This accessory allows a number of ACS 40 E DHW mixers can be connected in a cascade, and controlled electronically
by their own control units. All the DHW mixers in the cascade are set to function in rotation to ensure regular functioning.
A solenoid valve is fitted in the incoming cold water pipe of each DHW mixer. The functioning of each DHW mixer in the
cascade is determined by the opening of this valve, which is controlled by the mixer's control unit on the basis of user
settings.
Description
- Solenoid valve
- CAN bus cable
- Recirculation pump
- Recirculation kit
- Instruction manual
GENERAL SAFETY INFORMATION AND PRECAUTIONS
READ THE MANUAL SUPPLIED WITH THE DHW MIXER THOROUGHLY BEFORE PERFORMING ANY WORK ON IT.
A Primary inlet
B Primary outlet (return)
C DHW outlet
D Domestic cold water inlet
E Recirculation
1 Solenoid valve
FOR DHW MIXERS
DESCRIPTION
CONTENTS OF KIT
Qty
2-3 (depending on the number of DHW mixers in the cascade)
1
1
1 (complete with pipes, seals, M-F 3/4" M-F ball valve, non-return valve,
PT1000 sensor)
1
WATER CIRCUIT
A
B
D
1
Domestic cold
water supply
7
C
E
1
1