Princess auto DRIFT HERO Assembly Instructions Manual page 6

9\ TIGHTEN THE JACKSHAFT TO FRAME
MOUNT BOLT (M8*20 BOLT)
TROUQE 13-18 ft.lbs
CAUTION: ALL THE PARTS ARE PUT IN THE
PAG WITH THE LABEL "CLUTCH ASSEMBLY".
Jackshaft to Frame Mount Bolt
SECURE WIRES AND CABLES
1\ MOUNT THE THROTTLE CABLE TO THE
ENGINE THROTTLE BRACKET AND CONECT
SWITCH OFF WIRE WITH THE ENGINE WIRE.
Throttle Cable mount point
2\MAKE SURE THE ON/OFF SWITCH WIRE,
THROTTLE CABLE AND BRAKE CABLE ARE
NOT KINKED AND HAVE FREE MOVEMENT
WHEN THE HANDLE BAR ARE TRUNED FROM
LEFT TO RIGHT.
3\ SECURE WIRES AND CABLES TO FRAME
USING THE ZIP TIES PROVIDED.
ON/OFF Switch Wire Conect Point