Sony VAIO VGP-UDRW1 Operating Instructions Manual page 13

3
Connect the supplied USB cable to the USB connector on
the rear of the drive.
4
Connect the other end of the supplied USB cable to the USB
connector on the personal computer.
The drive is detected and identified by the personal computer.
USB cable
z
Hint
When this drive is connected to your personal computer for the first time, it takes a
moment for the personal computer to detect the drive.
5
Click "Start", and then click "My Computer" to verify that
(H: DVD-RW Drive) has been added in the "My Computer"
window*.
* This operation is an example of Windows Vista.
Note
Use only the AC adapter VGP-AC5V1 supplied with
this product. If you use an AC adapter other than the one
specified above, your speaker or computer may be
damaged.
USB connector
USB cable
USB connector
Polarity of the plug
GB
13