Ysoft SafeQ USB Card Reader v3 Administrative Manual page 6

USB Card Reader v3 Administrative Guide
Keep unprotected cords out of the path of foot traffic to prevent tripping. Do not leave cords
dangling anywhere where they can be pulled down and tripped over.
5. Configuration
For configuration see USB Reader tool for Reader configuration.
Risk Control
Description Measures
(details of
all existing
controls)
Falling of An mounting
object/compon kit is
ent supplied
with the
device
Tripping on a The cable is
cable fitted with a
connector at
both ends
that can be
disconnecte
d
Entry of water The device
into electronic is damaged
components
Exposure to The device
non-ionizing produces
radiation radiofrequen
(radiofrequenc cy radiation
y) below limits
indicated by
Risk Analysis
O P Risk
Ratin
g
Small Possibl L
e (C4)
Seriou Possibl M
s e (C3)
Small Possibl L
e (C4)
Small Improb L
. (D4)
Additional Measures
(details of all additional controls
to be carried out)
Correct mounting is indicated in the
manual
A recommendation on cable placement is
indicated in the manual.
The manual states the user is to prevent
water from entering the device.
The norms the device meets are listed in
the manual:
EN 55032:15
EN 55024:10
ETSI EN 301489-3 V1.6.1:13
ETSI EN 301489-1 V1.9.2:11
Product Sheet
6