Advertisement
Advertisement
Table of Contents
Related Manuals for Electronic Audio Experiments OBSTRUCTURES 0xEAE Boost
Summary of Contents for Electronic Audio Experiments OBSTRUCTURES 0xEAE Boost
- Page 1 Technical Manual 0xEAE / Boost Version 0 April 8, 2021 John W Snyder...
- Page 2 1 Introduction Thank you for purchasing the 0xEAE Boost, the first collaboration pedal from Elec- tronic Experiments and Obstructures. This manual is an in-depth guide for properly understanding and enjoying your pedal. Below is a bit of context. If you would like to skip ahead to how the pedal works, begin reading at the Operation section on the next page.
- Page 3 The power input is protected against over-voltage, under-voltage, and reverse polarity conditions up to 60V. The unit will not turn on if an incorrect power supply is used. Please note that all Electronic Audio Experiments products do not use batteries.
- Page 4 4 Detailed Operating Instructions When applying power to the Boost, allow the power supply about half a second to stabilize. Once this process is complete the bypass LED will turn red. This confirms the pedal is operational. Start with all of the sliders centered. Press the footswitch to engage the boost circuit.
- Page 5 Revision History Version Changes Draft Copy...
Need help?
Do you have a question about the OBSTRUCTURES 0xEAE Boost and is the answer not in the manual?
Questions and answers