Settings Available On The "System Settings" Screen; To Update The Firmware - Sony VGP-MR200 Operating Instructions Manual

Settings available on the "System Settings" screen

The "System Settings" screen offers the following settings:
Setting
TV Type
Network Settings
• Network Type
• IP Address
• Wireless LAN Configurations
Playback Preference
Firmware Update
Default Settings
System Information
Language Settings
Note
If you select "High Definition TV", the screen may go blank on some TV sets. If this happens, disconnect
the power cord of the Network Media Receiver, reconnect it, and turn on the Network Media Receiver
again.

To update the firmware

Visit the Web site listed in "Getting Help" (page 63) to update your Network Media Receiver to the
latest version and download any problem-solving firmware updates. For information on firmware
update procedures, refer to the instructions that accompany the downloaded tools. To get the most
out of this product, periodically visit the Web site and update the firmware of the Network Media
Receiver.
Notes
• During the update process, never disconnect the power cord or the network cable.
• After the update is complete, all settings except for the IP address return to the default settings.
Setting method
reference page
56
30
34
30
57
this page
56
—
57
Default setting
Standard Definition TV
—
Wired LAN
Automatic assignment (using
router)
—
High compatiblity mode
—
—
—
English
55