Add Detergent - GreenWorks Tools GPW2000 Operator's Manual

4.3.1 NOZZLE TYPE
SPRAY TIP APPLICATION
Green - Narrow fan tip (25° )
• The green pressure washer tip pro-
vides high versatility with its 25 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
O
25
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
White - Wide fan tip (40° )
• The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
O
40
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
Black - Soap spray tip
• The black soap spray tip, is used for
soap application. Soap is applied un-
der low pressure high volume for op-
SOAP
timum performance. Soap cannot be
applied under high pressure with this
machine.
Turbo Nozzle Tip
• The nozzle rotates in a zero to 15 de-
gree spray pattern in a circular mo-
tion to break down tough dirt and
grime. The spray pattern can cover
area of 4 to 8 inches wide, depending
on a distance between the tip and the
surface being cleaned.
4.3.2 INSTALL THE NOZZLE
1. Pull back the quick-connect collar on the spray wand (2).
2. Install the nozzle (20) onto the spray wand (2).
3. Release the quick-connect collar to attach the nozzle (20).
English
4.4

ADD DETERGENT

Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
Soap/detergent can only be applied with this machine when
the black nozzle(75 degree) is installed.
1. Put the machine vertically on a flat surface..
2. Open the cap on the deterfent tank (13).
3. Put the detergent into the detergent tank (13).
4. Close the cap.
Do not let detergent dry on the surface to prevent streaks.
9
WARNING
WARNING
NOTE
NOTE
NOTE
EN