Vitek VT-3796 Manual Instruction page 24

3796new1.qxd 4/1/05
ENGLISH
Saving into memory
All available radio stations with good signal quality can be saved into memory automat-
ically.
Press and hold the Bookmark (B.MARK) button for more than two seconds in order
to begin the automatic scanning process.
Saving a tuned radio station frequency
1. Use the Skip/Search ( / ) buttons to choose the
frequency that you want to save in radio station
search mode.
(For example: You are programming the frequency
FM 87.5 MHz).
2. Press the Bookmark (B.MARK) button and use the
Skip/Search ( / ) buttons to choose the memo-
ry location in which you want to save the station
and then press the Bookmark (B.MARK) button
again. The station is now saved in memory.
3. Repeat steps 1-3 to save other radio frequencies
Recalling a saved radio station
Press the Menu button and then use the Skip/Search ( / ) buttons to choose the
memory location.
Deleting a programmed radio station
If you want to delete a saved radio frequency, press and hold the Bookmark (B.MARK)
button for more than 1 second while in preliminary radio frequency setting mode.
Recording from the radio
1. Choose the FM radio mode.
2. Choose the station that you want to record.
3. While listening to the radio station in the FM band,
press the Record (
the radio station will begin.
4. Press the Play ( ) button to pause recording. Press the Record (
again to end recording.
Notes
Recorded files are named FMRC001.MP3, FMRC002.MP3, FMRC003.MP3.... and
so forth.
If the "FULL!!!" symbol appears on the display, delete some files to make room for
new recordings.
5:56 PM Page 20
REC) button. Recording of
20
REC) button