Using The Dvd-Rom Drive; Connecting The Dvd-Rom Drive To The Notebook Computer - Sony PCGA-DVD51 Operating Instructions (PUM) Operating Instructions Manual

Using the DVD-ROM
drive
Note
Do not connect or
disconnect the supplied
AC adapter while the
DVD drive is in use or the
notebook computer is in
power saving mode.
Disconnect the AC
adapter after removing
the PC card.
This section describes how to connect the DVD-ROM
drive to your notebook computer and how to insert or
remove a disc.
Connecting the DVD-ROM drive to the
notebook computer

Using the DVD-ROM drive

with the supplied AC adapter
When using the supplied AC adapter, the PC card
interface is set to the CardBus mode automatically and
the DVD-ROM drive enables high-speed data transfer
(enables reading of DVD-ROM disc data at a speed of
8 max. and CD-ROM data at a speed of 24 max.).
When you use the drive in the CardBus mode, the
POWER indicator lights in green.
1
Turn on the notebook computer.
2
Remove the PC card from the bottom of the DVD-
ROM drive.
3
Connect the supplied AC adapter to the DVD-
ROM drive and an AC outlet.
To an
AC outlet
(Continued)
13