Gui Items; Table 3-5: Gui Items - Westell Technologies PS71090E User Manual

3.5 GUI Items

Parameter
UL/DL Output Readings
Alarm Readout Displays
UL/DL Shutdown Setting
UL/DL Gain Setting
/ Attenuation
System Location Display
Control Send
rD
1.877.844.4274

Table 3-5: GUI Items

Specification
5dBm to 38dBm
PLL LD(Lock Detector),
Isolation,
AC Power,
DL shutdown,
Battery Charger Fail,
Relay Status,
Donor ANT VSWR / Malfunction
Service ANT VSWR
Manual Amp Off,
Battery Capacity Low,
UL HPA Fail,
DL HPA Fail,
UL Shutdown
23dBm to 36dBm
60dB to 90dB Gain
0dB to 30dB Attenuation.
PS71090E PS-SMR700/800
Company, Address, City, State,
Contact
All Control Page Settings
PS71090E Product Manual
October 2019, Rev A
Note
Reads and displays the UL/DL
output power
Displays alarm status
Use to set the peak power
(shutdown level)
Used to set the UL/DL system
gain.
Displays the Signal Booster name
and information.
Used to save settings in the
Control page.
WESTELL.COM
©2019 Westell
Technologies
Doc No. CS14702802UM
September 2019;
Page 23 of 61