Copyright and Trademark Acknowledgements
The following products are referred to in this manual:
is a registered trademark of Westell Technologies, Inc.
•
1 General Information
1.1 Document Purpose and Intended Users
The purpose of this document is to provide a step-by-step procedure to help experienced technicians or
engineers install and commission an in-building Passive Wireless Distributed Antenna System (DAS) using
Westell's
PS71090E
2W Public Safety Signal Booster. Follow the instructions in this guide to minimize
risks associated with modifying a live system and preclude service interruptions. This document assumes
the technician or engineer understands the basic principles and functionality involved with an RF Signal
Booster and in-building wireless systems. This guide has been written to address the practical concerns
of the installer.
1.2 Application
Use this guide whenever there is a need to add enhanced signal capability to an existing system or
when a Signal Booster is included in a new installation.
1.2.1 Product Registration Information
The serial number is located on the label on right-side of the enclosure. Record this number in Figure
1-1. Retain this manual, along with proof of purchase, to serve as a permanent record of your
purchase.
rD
1.877.844.4274
PS71090E
Product Manual
October 2019, Rev A
WESTELL.COM
©2019 Westell
Technologies
Doc No. CS14702802UM
September 2019;
Page 11 of 61