Table of Contents
Advertisement
GETTING STARTED
1.
Connect the antenna to the camera.
1
2.
Power on the camera by connecting the camera cable to the adapter
2
IMPORTANT: Depending on your Network setup, you may need to connect
the camera to your modem/router using an Ethernet cable (not included)
the first time you add the camera to the app. Once you establish a connec-
tion you can remove the cable and continue using your Wi-Fi connection to
view the camera.
3.
Connect the camera to your modem/router using an Ethernet cable for
3
first time setup (not included)
NOTE: To access the Reset Button and SD Card (installed), remove the cover
on the back of the camera.
For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT
1
2
*Optional: Router
Camera Reset
3
Button
SD Card
Input
Advertisement
Table of Contents
