Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Defender wireless IP2KCB1
Summary of Contents for Defender wireless IP2KCB1
- Page 1 Wireless 2K IP Camera Product Manual IP2KCB1...
-
Page 2: Thank You
THANK YOU Congratulations on your Defender 2K Wireless IP Camera purchase! You’ve made the best choice to protect what you value most We take our product performance and quality very seriously and we want you to be completely satisfied with your purchase. If you have any questions, or to get the most our of your product, visit www.defender-usa.com first for additional product features information, specifications or... -
Page 3: Warranty Terms
WARRANTY TERMS DISCLAIMERS Wireless cameras require a wired connection to a power outlet. DEFENDER® products are guaranteed for a period of one year from the When viewing remotely: Video quality and connectivity is dependent on date of purchase against defects in workmanship and materials. This network performance. -
Page 4: Safety Warnings
SAFETY WARNINGS • We recommend using an Uninterruptable Power Supply (UPS): Connecting to a UPS allows for continuous use during a power outage. The remaining power duration will depend on the UPS used. • Use the Power Supply/Adapter provided: Do not use these products with a power supply that exceed the specified voltage. -
Page 5: Compliance Statements
COMPLIANCE STATEMENTS FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 6: Table Of Contents
TABLE OF CONTENTS Thank You Support Warranty Terms Disclaimers Safety Warnings Compliance Statements What’s Included Functions Connecting Your Camera Getting Started (Mobile App Setup) Camera Installation Camera Reset Specifications FAQs... -
Page 7: What's Included
WHAT’S INCLUDED • 1 X Defender Wireless 2K IP Camera • 1 X Wireless Wi-Fi Camera Antenna • 1 X Waterproof Connector • 1 X Camera Power Supply / Adapter (3 meters / 10 ft) • 1 X Camera Mounting Hardware •... -
Page 8: Functions
BUTTONS & FUNCTIONS 1. Reset Button 2. Indicator Light 3. Lower Cover 4. Micro SD Card Slot 5. Indicator Light 6. Waterproof Ring 7. Antenna 8. Locking Screw... -
Page 9: Connecting Your Camera
CONNECTION YOUR CAMERA We recommend testing your camera indoors before installing. 1. Attach the waterproof ring and antenna. 2. Remove the lower cover. This requires a small Philips head screw driver. 3. Insert the SD Card into the Micro SD Card Slot until it clicks into place 4. -
Page 10: Getting Started (Mobile App Setup)
GETTING STARTED (MOBILE APP SETUP) Before you start: • You will need access to your email – the time sensitive Verification Code will be emailed • You will be asked to create a password for the App – think of a password that is easy for you to remember but hard for others to guess •... - Page 11 GETTING STARTED (MOBILE APP SETUP) • Tap Single Camera • Place your mobile • Tap to enter you • The Add successfully • Check the Live View • The camera SN will Setup to add the device within 30 appear on the Wi-Fi password (if message will appear to make sure your...
-
Page 12: Camera Installation
CAMERA INSTALLATION 1. Determine the area you want to cover and plan out where the camera should be installed. Make sure there is access to a power outlet in this area. 2. Place the camera in the desired area and check your Defender SmartSignal app to make sure the camera is live steaming. If it is not streaming, you may need to move it closer to your Wi-Fi router. -
Page 13: Camera Reset
CAMERA RESET If the camera will not connect or has lost connection and will not pair, you will need to reset it. The camera reset is on the bottom of the camera behind the lower cover. To remove the cover, you will need a small Phillips head screw driver. Camera Reset 1. -
Page 14: Specifications
SPECIFICATIONS Model Number IR LED Quantity IP2KCB1 Image Sensor 4.0MP, 1/3" CMOS Field of View (FOV) 127⁰ Diagonal Housing Metal Night Vision Range Up to 30M (100ft) Effective Pixels 2688 * 1520 Power Supply DC 12V, 2.0A Electronic Shutter Microphone... -
Page 15: Faqs
FAQs Is this camera completely The Wireless 2K IP Camera is wireless in terms of how it connects to your modem/router. This means that it connects in a similar way a wireless? smartphone or laptop computer connects to your internet using Wi-Fi. This camera does require a power connection using the power adapter provided. - Page 16 Protect what you value most™...
Need help?
Do you have a question about the IP2KCB1 and is the answer not in the manual?
Questions and answers