Use; Installation; Requirements For A Measurement - Scania Interlock 7000 Instructions For Use Manual

Use

The components are approved in accordance with the following
directives and standards:
Component
Control unit
Camera
Handset
GPRS module
Coding Directive/
Standard
A 2014/30/EU
(Interlock 5000/7000)
2006/28/EC
2009/19/EC
EN 50436-1, -2
NHTSA / BAIID
B 2014/30/EU
(Interlock 5000/7000)
C 1999/5/EC
(Interlock 7000)
FCC Part 15
IC RSS-210
NOTICE
i
i
Applied standards are listed with their date of issue in the
Declaration of Conformity.
24
The ABE (Allgemeine Betriebserlaubnis—General Operating License)
has the KBA code 91592.
3
Coding
A
3.1
A
A, C
A, C
Reference
The installation may only be carried out by an authorized Dräger
Interlock service centre or a professional auto repair shop according to
EMC Directive
the respective instructions for installation.
EMC Directive,
When choosing the installation site, the existing regulations for the
motor vehicles
interior of vehicles have to be observed.
RFI suppression (EMC),
motor vehicles
3.2
Alcohol Interlock, Europe
Alcohol Interlock, USA
EMC Directive
Radio, Europe
Radio, USA

Radio, Canada
Use

Installation

WARNING
!
Alterations and additions to the device may cause danger.
Such alterations and additions invalidate the certificate of
installation contained in this instructions for use booklet.

Requirements for a measurement

WARNING
!
No alcohol and solvent vapours (disinfectants, window
cleaning fluids) in the ambient air.
Do not store in ambient air containing alcohol and solvent
vapours (disinfectants, window cleaning fluids).
Do not allow a high alcohol concentration to reach the sensor, e. g.
from drinking alcohol, eating alcohol containing foods or rinsing
the mouth with alcoholic mouthwash just before measurement.
Dräger Interlock 7000