Technical Information - Smeg DI4522 User Manual

Problem
Odours inside the appliance.
Limescale deposits on the ta‐
bleware, on the tub and on the
inside of the door.
Dull, discoloured or chipped
tableware.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible causes.

TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to de‐
crease energy consumption.
3) In accordance with the 1059/2010 regulation.
Possible cause and solution
• Refer to "Internal cleaning".
• Start the Self Clean programme with a descaler or a
cleaning product designed for dishwashers.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Use salt and set regeneration of the water softener even
when multi-functional tablets are used. Refer to "The
water softener".
• Start the Self Clean programme with a descaler de‐
signed for dishwashers.
• If limescale deposits persist, clean the appliance with
the suitable detergents.
• Try a different detergent.
• Contact the detergent manufacturer.
• Make sure that only dishwasher-safe items are washed
in the appliance.
• Load and unload the basket carefully. Refer to the bas‐
ket loading leaflet.
• Place delicate items in the upper basket.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water
Place settings
Left-on mode (W)
3)
Off-mode (W)
446 / 818 - 898 / 550
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
2)
9
5.0
0.50
25