Table of Contents
Advertisement
Problems for Audio Player for Adapter
On playback
When you try to start Audio Player for Adapter after connecting the
Audio Adapter to your CLIÉ handheld, power turns off suddenly or
an error message appears.
, The built-in battery may not be fully charged. Depending the model,
an error message appears even if the remaining battery charge
indication is more than 30 % on the Launcher screen.
The number of audio files does not appear when you start Audio
Player for Adapter.
, When you insert the Memory Stick media which has many audio
files recorded, you cannot operate your Audio Player for Adapter
for a few seconds; this is not a malfunction.
There is no sound.
, Adjust the volume.
The volume does not increase.
, Cancel the AVLS function.
Sound skips.
, Playback sound may be distorted when you tap REVERSE or
SHUFFLE during playback; this is not a malfunction.
Sound is distorted.
, If you record audio files with low bit rate, the sound of the audio files
may be distorted. However, this is not a malfunction. For details
about the bit rates that this application supports, see 4 page.
There is no sound from the one channel of the headphones.
, Make sure that the headphones plug is connected securely.
Continued on next page
33
Advertisement
Table of Contents
