Table of Contents
Advertisement
My BERNINA
18
Illustration
Name
Height compensating tool
Selection of needles
Seam guide, right
Screwdriver Torx, gray
Screwdriver red (slot)
Angular Torx wrench Torx
Brush/Needle Inserter
Sewing machine oil
Power cable
Foot control
Purpose
To level an angled position of
the presser foot sole when
sliding over thick seams.
For any common applications.
To align regular seam distances.
To change the needle.
To loosen and tighten slotted
screws.
To open the headframe.
To clean the feed dog and the
looper area.
To oil the machine.
To connect the machine with the
power supply system.
To start and stop the machine.
To control the sewing speed.
Advertisement
Table of Contents
