44
GPI
Assign frequently used features to GPIs (General Purpose Interface) 1 to 7.
Each GPI can send a signal to execute the feature assigned to it.
•
The features that can be assigned to GPIs 1 to 6 are as follows:
- [Undefined]: No feature is assigned.
- [Marker Preset 1]: Change the current marker information to the value stored in Marker Preset 1.
- [Marker Preset 2]: Change the current marker information to the value stored in Marker Preset 2.
- [Marker]: Change the marker options.
- [Center Marker]: Set the centre marker.
- [Safety Area]: Change the safety zone.
- [Tally R]: Sets Tally R.
- [Tally G]: Sets Tally G.
- [Input HDMI1]: Switches input to HDMI1.
- [Input HDMI2]: Switches input to HDMI2.
- [Input SDI 1]: Switches input to SDI1.
- [Input SDI 2]: Switches input to SDI2.
- [Input SDI 3]: Switches input to SDI3.
- [Input SDI 4]: Switches input to SDI4.
•
GPI 7 is always set as [Power Key].
- [Power Key]: Turns power on or off.