Performing A Hard Reset - Sony PEG-TG50 Intellisync Operating Instructions Manual

Performing a hard reset

If the soft reset does not solve the problem, you need to perform a hard reset to
restart your CLIÉ handheld.
Notes
• All records and add-on applications stored in your CLIÉ handheld
will be erased by performing a hard reset.
• Perform a hard reset only if a soft reset does not solve your problem.
You can restore your CLIÉ handheld data if you have made a backup on your
computer or "Memory Stick" media.
b
For details, refer to "Backing up your Sony CLIÉ™ handheld data" in the
"Handbook."
1
Slide down the POWER/HOLD switch.
2
While sliding down the POWER/HOLD switch, press the
RESET button gently with the stylus pin.
Note
Keep sliding down the POWER/HOLD switch.
3
When the palm powered screen is displayed, release the
POWER/HOLD switch after three seconds.
A message warning that you are about to erase all the data stored on your
CLIÉ handheld is displayed.
Continued on next page
27