Flair Signature PRO 2 Quick Start Manual

Troubleshooting: Contact Us!
For additional information on how to best use
your Flair, including video demonstrations and
frequently asked questions, visit us online at:
www.flairespresso.com/brewguide
We want you to love your Flair! Our team is
standing by to help troubleshoot any issues that
may arise. If you experience any problems, please
contact us immediately at:
service@flairespresso.com
To shop for additional accessories, replacement
parts, or upgrades please visit our online shop at
the following URL:
www.flairespresso.com/shop
Handcrafted Espresso
After Brewing
Cleaning Your Flair
Cleaning the Flair is easy. To remove used espresso
grounds from your Flair you can knock them out against the
side of a trash can or dig the grounds out with a utensil.
Once the grounds are
removed, rinse all brewing
parts in cool water.
No soap needed! It can
impact your espresso's taste.
Do not clean any Flair parts in a dishwasher.
Packing & Storing Your Flair
1
2
3
Limited Warranty
The Flair Espresso Maker's Press Stand and Brewing Cylinder and Stainless
Steel Plunger are warrantied against functional defects for 5 (five) years from
the purchase date, when used in accordance with all operating instructions.
Parts that are more subject to normal wear and tear, such as O-rings,
Dispersion Screen, Silicone Sleeves, Piston Stem, and Portafilter are warranted
against defects in material, design or workmanship for 1(one) year from the
purchase date, although these items are expected to last beyond the warranty.
Proof of purchase is required to validate the warranty period.
The warranty applies only when the product and parts are used in
accordance with all operating instructions. The warranty becomes
void if the product or parts are modified, abused or improperly
used, damaged by accident, falls, or neglect, or if any parts are improperly
installed. The pressure gauge is sensitive to impact and must remain dry
outside at all times.
Contact Customer Service with questions about a possible defect. All defective
product claims will be handled on an individual basis by our Customer Service
that will ask you to describe the problem, provide photos, and provide the
purchase date and location. Upon confirmation of the defect, we will give you
a Return Material Authorization (RMA) for you to use and return the product
or defective part. The RMA number must be clearly written on the side of the
shipping box in which you return the product. Unless otherwise instructed
by us, the product or parts must be sent freight prepaid to our company
address and not to the store it was purchased from. Intact Idea makes no
other warranties, express or implied, and specifically excludes warranties of
merchantability and fitness for a particular purpose. Intact Idea's liability under
this warranty shall be limited to repair or replacement of the defective part(s),
whichever may apply.
Intact Idea shall not be responsible for any damages or personal injuries,
whether incidental or consequential, or claims for such damages based on any
legal theory, which may occur while using this product. This warranty gives you
specific legal rights, and you may also have other rights which may vary from
state to state and country to country.
26072 Merit Circle, Suite #122,
Laguna Hills, CA, 92653 USA
service@flairespresso.com • www.flairespresso.com
© Intact Idea, All Rights Reserved
Flair is a trademark of Intact Idea, LLC.
Product designed in California, USA - Made in China
Handcrafted
Espresso
QUICK START GUIDE
Flair Signature PRO 2