Commercial Electric MS8301A Use And Care Manual
  1. Manuals
  2. Brands
  3. Commercial Electric Manuals
  4. Measuring Instruments
  5. MS8301A
  6. Use and care manual

Commercial Electric MS8301A Use And Care Manual

Hide thumbs Also See for MS8301A:

Advertisement

Table of Contents

1-888-526-6193
1-888-526-6193

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS8301A and is the answer not in the manual?

Questions and answers

Related Manuals for Commercial Electric MS8301A

Summary of Contents for Commercial Electric MS8301A

  • Page 1 1-888-526-6193 1-888-526-6193...

  • Page 2: Safety Information

    Table of Contents Safety Information (continued) Safety Information Symbols Definition (MEASUREMENT CATEGORY III) is applicable to test and measuring circuits CAT III connected to the distribution part of the building’s low-voltage MAINS installation. 1-888-526-6193...

  • Page 3: Warranty

    Pre-Operation Safety Information (continued) FCC Compliance Statement Warranty 1-888-526-6193 1-888-526-6193...
  • Page 4 Pre-Operation (continued) 0.1mV Resistance indicator mV Millivolt and mA Milliamps 1-888-526-6193...
  • Page 5 INCORRECT CORRECT 1-888-526-6193...
  • Page 6 Completing a Battery 200m Voltage Measurement Insert the RED test lead to VΩ socket and BLACK test lead to COM socket and rotate function knob switch 1.5V or 9V battery test setting. MISUSE CAN RESULT FUSE BLOWN Connect BLACK test lead to negative and RED test lead to positive terminal of battery.
  • Page 7 Insert the RED test lead to VΩ socket Insert the RED test lead to VΩ socket and BLACK test lead to COM socket and BLACK test lead to COM socket and rotate function knob switch to the and rotate function knob switch highest Ω...
  • Page 8 Insert the RED test lead to VΩ socket DC Current less than 200mA and BLACK test lead to COM socket For mA DC Current less than 200mA, and rotate function knob switch Insert the RED test lead to VΩ socket ) setting.

  • Page 9: Battery Replacement

    Battery Replacement When ( ) indicator is displayed on LCD, batteries must by replaced. Remove screw from battery door Replace 2 x AAA batteries (Note proper polarity) Replace battery cover and secure with screw. Fuse Replacement Fuse may blow if more than 200mA is applied to theVΩ socket ,more than 10A is applied to the 10A socket , or Voltage has applied to function with current setting.
  • Page 10 1-888-526-6193...

This manual is also suitable for:

1001 418 355

Table of Contents

Save PDF