Cebora POWER SPOT 5700 Instruction Manual page 11

D- Torch trigger connector
E- Main switch
F- Fuse Ø 6.3x32 (delayed type). The equipment is fi tted
with a 12A-T fuse.
G- Knob for the setting and control of welding operations.
3.2 GUN DESCRIPTION
K- Gun body
L- Grip
M- Control cable
N- Welding current cable
O- Welding command button (works only with the gun
pressed against the sheet metal)
P- Force setting indicator
Q- Force adjustment screw (increases when turned clock
wise)
R- Ring to hold spacer Z
S- Clamp locking ring-nut
T- Safety bellows
U- Holding screws for ring R
V- Screw to adjust stud bolt protrusion
W- Holding nut.
X- Stud bolt gripping clamp
Y- Screw
Z- Spacer
F
A
E
D
B
Fig. 1
X S Z T
Y
X W
1÷1,5 mm
3.2.1 Preparing the gun
Always use high-quality studs with contact point start-
up for capacitor discharge welding, which comply with
standards and are made of a metal compatible with the
welding to be done.
Having selected the stud bolt to be welded for type,
diameter, length and material, use and adjust the gripping
R U O K
V
M N L
Fig. 2
G
C
P Q
11