Test Procedure - AutoConnect AC202 Quick Start Manual

AC202

Test procedure

1) Login to view and test the AC202 device
A: via the AutoConnect website
a) Go to www.AutoconnectGPS.com and
click on " Customer Login"
b) Enter the AC202's Serial# (ESN)
for both the User Name and password.
c) Click Login.
The AutoConnect website dashboard
should load and display the Serial number
of the AC202 device that you are
installing.
2) Test Vehicle GPS Connectivity
A: via the AutoConnect website
The successful completion of this section will enable you to see the current position of the
AC202 device on the dashboard/Smartphone map.
a) Click on device serial # on the left side
of the screen. The asset info box will open
on the bottom left corner of the screen.
b) Click on the "Asset Commands & Con-
trols" icon located at the top of the Asset
Info box*
*if using Type 2 to Type 9 please ensure you
have selected appropriate data protocol
QUICK INSTALL GUIDE
B: via the AutoConnect Smartphone App
a) Download the AutoConnect Smart-
phone app by searching "Autoconnect
GPS" for iPhone, Android or Blackberry
b) Open App and click on "Config " then
"Login"
c) Enter the AC202's Serial# (ESN)
for both the User Name and password.
d) Click "Save"
B: via the AutoConnect Smartphone App
a) Click on the "GPS" tab
b) Click on the "Bullseye" button at top left
of screen
2
pg