Securing The Projector - BenQ MP772 ST User Manual

Securing the projector

Securing the projector
Securing the projector Securing the projector
Using a security cable lock Using a security cable lock
Using a security cable lock Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock,
such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on
the rear side of the projector. See item 11 on page
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the
lock's documentation for finding out how to use it.
Utilizing the password function Utilizing the password function Utilizing the password function Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-Screen
Display (OSD) menu.
WARNING: You will be inconvenienced if you activate the password functionality and
subsequently forget the password. Print out this manual (if necessary) and write the password
you used in this manual, and keep the manual in a safe place for later recall.
Setting a password Setting a password
Setting a password Setting a password
Once a password has been set and the power on lock is activated, the projector cannot be
used unless the correct password is entered every time the projector is started.
1. Open the OSD menu and go to the SYSTEM SETUP: Advanced
menu. Press Mode/Enter
2. Highlight Power On Lock
3. As pictured to the right, the four arrow keys ( ,
, , , ,
3, 4). According to the password you desire to set,
press the arrow keys to enter six digits for the
password.
4. Confirm the new password by re-entering the
new password.
Once the password is set, the OSD menu returns
to the Security Settings
IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected
password down here in this manual in advance or right after the password is entered so that it
is available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5. To leave the OSD menu, press Menu/Exit
26 Operation
Mode/Enter. The Security Settings
Mode/Enter Mode/Enter
Power On Lock and select press On
Power On Lock Power On Lock
, , , , ) respectively represent 4 digits (1, 2,
Security Settings page.
Security Settings Security Settings
9 for details.
SYSTEM SETUP: Advanced > Security Settings
SYSTEM SETUP: Advanced SYSTEM SETUP: Advanced
Security Settings page displays.
Security Settings Security Settings
On by pressing
On On
Menu/Exit. . . . Menu/Exit Menu/Exit
Security Settings
Security Settings Security Settings
/ .
INPUT NEW PASSWORD
MENU Back