Electrolux EWF 128500 H User Manual page 21

Table of Contents

Advertisement

Available languages

Available languages

Proceed as follows:
1. Unplug the appliance.
2. If it is necessary, wait until the water
has cooled down.
3. Open the filter door.
4. Place a container close to the filter.
5. Unscrew carefully the drain filter to
drain out the water. When no more
water comes out, remove the filter. If
necessary, use pliers. Always keep a
rag nearby to dry up any water
spillage when removing the filter.
6. Clean the filter under a tap, to remove
any traces of fluff.
7. Remove foreign bodies and fluff from
the filter impeller.
Check carefully whether the filter
impeller rotates (it rotates jerkily). If it
doesn't rotate, please contact the
Service.
8. Refit the filter by inserting it correctly
into the special guides.
Screw firmly the filter.
9. Close the pump door.
ENGLISH
21

Advertisement

Table of Contents
loading

Table of Contents