How To Install On Windows Xp System - BenQ GL2030 User Manual

How to install on Windows XP system

1. Open Display Properties
The quickest shortcut to Display Properties is through the Windows desktop.
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows XP version, Control Panel is located directly under the main Start menu item.
The menu options displayed will depend upon which type of view is selected for your system.
•
Under the Classic view, click Start | Control Panel | Display.
• Under the Category view, click Start | Control Panel | Appearance and Themes | Change
the screen resolution.
The Display Properties window will display.
Settings
2. Click the
The Advanced Display Properties window will display.
3. Click the Monitor
If there is only one monitor in the list, it will already be selected for you.
Properties
4. Click the
The Monitor Properties window will display.
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper
drivers are already installed, and you need do nothing further. Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you
will need to continue with these instructions.
Driver
5. Click the
The Hardware Update Wizard will display. Follow the wizard instructions noting the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you attached the
monitor to.
7. Check the option
8. Check the option
removable media
Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6.
When completes, the wizard should have found and selected the BenQ driver on the CD appropriate to
your monitor model.
9. Select (single-click) the correct name of your monitor from provided driver list on the CD,
and click the
This will copy and install the appropriate monitor driver files to your computer.
10. Click Finish
This will close the wizard and return you to the Monitor Properties window.
Close
11. Click
This will close the Display Properties windows. You may be prompted to restart your computer
after the driver update is complete.
16 Getting the most from your BenQ monitor
.
Advanced
tab and the
tab and select the
button.
Update Driver
tab and the
Install from a list or specific location
Search for the best driver in these locations
Next
, then click
Next
button.
.
OK OK
, , and .
button.
Plug and Play Monitor
button.
.
from the list.
and click Next .
and also check Search