Related Manuals for ARRI AMIRA SUP 4.0
Summary of Contents for ARRI AMIRA SUP 4.0
- Page 1 AMIRA SUP 4.0 Software Update Package SUP 4.0.27 R E L E A S E N O T E S Date: May 23, 2016...
-
Page 2: Table Of Contents
Timecode ........................ 13 Usability ........................14 Viewfinder ....................... 15 Important Changes and Bugfixes ................15 Service ........................16 AMIRA SUP 4.0 Page 2 of 16 Release Notes All data subject to change without further notice. -
Page 3: Introduction
A. Introduction We are proud to announce the release of the AMIRA Software Update Package 4.0 for all ARRI AMIRA cameras. This version expands functions for all AMIRA models as indicated below. SUP 4.0 includes major improvements for AMIRA and we strongly recommend installing this update at your earliest convenience on all AMIRA camera models. -
Page 4: Technical Specifications
Exposure Index EI 160 to EI 3200 (EI 800 base sensitivity) Exposure Latitude 14+ stops over the entire sensitivity range from EI 160 to EI 3200 as measured with the ARRI Dynamic Range Test Chart (DRTC-1) Audio Recording 4 channels, 24 bit PCM, 48 kHz Integrated motorized ND FSND 0.6, 1.2, 2.1... - Page 5 *** embedded audio only in 1,5G and 3G **** Disclaimer: The camera operator is responsible for enabling wireless camera control. We provide password protection, but please be careful and diligent in providing this only to authorized production personnel.” AMIRA SUP 4.0 Page 5 of 16 Release Notes...
-
Page 6: Update Instructions
You can find the Software Update Package (SUP) in the AMIRA Downloads Section on arri.com/amira/downloads. You have to register your AMIRA camera with your camera serial number to access the Software Update Package (SUP) download. Existing ALEXA customers with an active ALEXA account for the download section can use this account, unless otherwise requested. -
Page 7: New Features
The S16 HD recording mode uses a 1600 x 900 sensor cutout and scales it to full HD 1920 x 1080. The S16 HD mode allows the use of Super 16 lenses, like ARRI Ultra 16 lenses on AMIRA. The image circle of the S16 HD mode is15.1mm which is slightly larger than the usual image circle of 14.5mm for S16 lenses. -
Page 8: Switchable Zoom Position In The Viewfinder
The number of looks that can be stored in camera has been increased from 20 to 50. 7. Transvideo Starlite HD5-ARRI Interface improvements The functionality and layout of the touch interface used on the Transvideo Starlite HD5-ARRI has been improved. The interface has been modified with a more neutral look and feel, and additional functionality has been introduced. -
Page 9: Known Issues
• Record Start/Stop on Canon HJ18 B4 lens In case the start/stop function on the Canon HJ18 B4 lens is not working with the ARRI B4 Mount and connected Hirose cable, please execute a “Reset all” on the lens. -
Page 10: Audio
IAOU 1 audio board. This would only affect the volume of the headphone out. If you recognize reduced maximal volume of the headphone output, this may indicate this damage. Please contact an ARRI service center in this case. • Battery change with connected AES3 source. -
Page 11: Media
• CFast card erase with Apple OS X El Capitan With the Disk Utility in El Capitan 10.11, it is currently not possible to erase CFast cards formatted with AMIRA. There are workarounds possible with using the Terminal tool, please contact ARRI service. Apple is informed about this issue. -
Page 12: Recording
Please follow the instructions in the warning to avoid damage to the card or further recordings. No action is required if no warning is displayed. Please contact ARRI service for more information or if you encounter any further issues. • SanDisk CFast 60GB card frame rate limitations. -
Page 13: Sup Update
Please leave the external source connected for at least 30 seconds. Before disconnecting the timecode source set Menu/System/Sensor/Genlock back to OFF in order to avoid an error message. AMIRA SUP 4.0 Page 13 of 16 Release Notes... -
Page 14: Usability
• "ARRI 709" look file export If for any reason you may want to export the look file "ARRI 709" to USB, you are suggested to make a DUPLICATE and just save it under a different name (i.e. "ARRI 709mod"). -
Page 15: Viewfinder
AMIRA recording. This is for protection against issues caused by different CFast 2.0 formatting schemes used by other cameras manufacturers. Please see the Known Issues section for additional information on media handling. AMIRA SUP 4.0 Page 15 of 16 Release Notes... -
Page 16: Service
For service purposes the ND filter stage can be moved mechanically with screws at the bottom of the camera. Please do not turn the screws yourself, as this could severely damage the interior of the camera. Please contact an ARRI service station for any issues here. AMIRA SUP 4.0...
Need help?
Do you have a question about the AMIRA SUP 4.0 and is the answer not in the manual?
Questions and answers