TELUS ADC-SG130Z Installation Manual page 2

2
Connect to Modem
You'll need:
Automation Hub
Alternative: Connect with Network Switch
You'll need:
Automation Hub Network Switch
NOTE
The Network Switch is only required if there are no available LAN ports
on your existing modem. If you unplug a device to free up a port on
your modem, make sure you plug that device into the Network Switch.
Ethernet Cable
Ethernet Cable (x2) Power Supply (x2)
3
Connect Power
You'll need:
Automation Hub Power Supply
4
Booting Up
5 minutes
Flashing
Flashing
(slow)
Off
Off Solid
Off Flashing
Solid