Lennox LM009CI-100T432-1 Service Manual page 76

Service Manual
Steps
4.Remove grille
Remove connection screws between the
front grille and the front panel. Then remove
the front grille.
5. Remove panel
Remove connection screws connecting the
front panel with the chassis and the motor
support, and then remove the front panel.
6. Remove right side plate
Remove connection screws connecting the
right side plate with the valve support and the
electric box. Then remove the right side
plate.
7. Remove axial flow blade
Remove the nut fixing the blade and then
remove the axial flow blade.
Installation and Maintenance
Procedure
grille
axial flow blade
panel
right side plate
73