Page 2
Xen Source, XenApp, XenAppliance, XenCenter, XenClient, XenDesktop, XenEnterprise, XenServer, XenSource, Xen Data Center, and Zenprise are trademarks of Citrix Systems, Inc. and/or one of its subsidiaries, and may be registered in the U.S. Patent and Trademark Office and other countries. Other product and company names mentioned herein may be trademarks of their respective companies.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Quick installation and configuration Review the following information before proceeding with installation of the SD- WAN 110-WiFi-SE appliance. Before you begin Verify that the following components and accessories are included: Citrix SD-WAN 110-WiFi-SE appliance.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Citrix SD-WAN 110-WiFi-SE The Citrix SD-WAN 110-WiFi-SE platform is a branch side appliance that can be deployed in micro and small branch offices/Remote sites/ retail stores, and temporary worksites. It is a single box in branch solution that helps to reduce hardware foot print and eases branch deployment.
Page 6
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Figure 2. Citrix SD-WAN 110-WiFi-SE back panel Note: Port 1/1 is the default LAN port and port 1/2 is the default WAN port. Port 1/3 is disabled. The default LAN IP is 192.168.0.1. The WAN port is configured as a DHCP client.
Therefore, consider the lowest and highest operating temperatures of the equipment when making a decision about where to install the appliance in the rack. The Citrix SD-WAN 110-WiFi-SE appliance can be installed in the following installation modes: • Desktop mount •...
Warning: There is a risk of explosion, if the battery is replaced with an incorrect battery type. Desktop mount the appliance The Citrix SD-WAN 110-WiFi-SE appliance can be desktop mounted using the rubber feet shipped in the appliance package. 已註解 [PK[1]: Is this right? Do we provide rubber feet for...
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Rack mount the appliance 1. Fix the shelf to the rack with the provided screws. 2. Install the chassis. Place the appliance screw slots on the positioning screws on the shelf and slide it, to lock it into position.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide 4. Install the power adapter. Place the power adapter on the adapter slot. 5. Install the adapter fix bracket to hold the power adapter in position. Place the adapter fix bracket on the slot and fix it with a screw.
Connect the interfaces on the appliance to the network ports on the appropriate switches by using Ethernet/fiber optic cables. Note: Citrix SD-WAN 11.1 supports day-0 provisioning and day-n management of the appliance through both management and data ports. Warning: Connecting multiple network ports to the same switch or VLAN can result in a network loop.
Page 13
Citrix SD-WAN 110-WiFi-SE Quick Start Guide To configure the management IP address for a hardware SD-WAN appliance, do the following: Note You must repeat the following process for each hardware appliance you want to add to your network. 1. If you are configuring a hardware SD-WAN appliance, physically connect the appliance to a PC.
Page 14
Default administrator password: password Note: From Citrix SD-WAN 11.0.3 release onwards, it is mandatory to change the default admin user account password while provisioning any SD-WAN appliance or a new SD-WAN SE VPX. This change is enforced using both virtual WAN CLI and...
Citrix SD-WAN 110-WiFi-SE Quick Start Guide System specifications The following table summarizes hardware specifications for the Citrix SD-WAN 110-WiFi- SE platform edition. Specifications 110-WiFi-SE Regulatory model SD-WAN 110-WiFi number Memory Non-Volatile Storage 32GB WiFi Dual band 2.4GHz & 5GHz 2x2 MIMO...
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Compliance Responsible Party – U.S. Contact Information: Citrix Systems, Inc. 4988 Great America Parkway Santa Clara, CA 95054 USA compliance.prime@citrix.com This device complies with part 15 of the FCC Rules. Operation is subject to the following...
Page 18
Citrix SD-WAN 110-WiFi-SE Quick Start Guide 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1.
For information about other Citrix SD-WAN platform editions, see Citrix SD-WAN Platforms. To contact Citrix Support, call 1-800-4-CITRIX (1-800-424-8749), or log on to My Citrix at http://www.citrix.com. You will be asked for your hardware serial number as part of the support process.
Need help?
Do you have a question about the SD-WAN 110-WiFi-SE and is the answer not in the manual?
Questions and answers