Aperio Wireless Lock Technology; Sipass Card Technologies In Aperio Locks - Siemens SiPass integrated Controller And Device Installation Manual

FLN Devices and Readers
3

Aperio Wireless Lock Technology

3.12 Aperio Wireless Lock Technology

3.12.1 SiPass Card Technologies in Aperio Locks

36 | 38
With the enhancements made in SiPass integrated MP2.76 SP1 onward, the
Aperio Wireless Lock technology is expanded to support multiple Aperio Hubs
®
connected to one ACC-AP through the Aperio FLN Bus (RS485 communication
channel). Up to 32 wireless Aperio Lock devices can be paired across all the
Aperio Hubs connected to one ACC-AP FLN. You can select the Card Technology
for selected locks and also assign a custom card format.
Card Technologies supported by Aperio Locks must be configured in SiPass
integrated to read correct sectors and blocks from the cards. This is especially
required for existing site installations having various types of card technologies
already in use.
Currently, SiPass integrated supports the following card technologies in the FLN
Configuration tool for Aperio Wireless Locks:
● Siemens Mifare GID
● Siemens Mifare Facility
● Siemens RS485 UID
● All HID Prox: Currently encoded on smart card only for Aperio
● Custom Card (Weigand): Currently encoded on Mifare card only for Aperio
● iClass OSDP: Required for sites that use iClass readers and might have iClass
OSDP Credential Profile.
With MIFARE cards, the Sector + Block is configured. In the Aperio configuration,
there is no Block; and a Byte Offset is used for the Sector.
The following Blocks are equivalent to the Byte Offset:
● Block 0 = 0 Byte Offset
● Block 1 = 16 Byte Offset
● Block 2 = 32 Byte Offset
● Block 3 = 48 Byte Offset
Each Block is 16 bytes.
A6V11164550