Changing The Dust Bag - Bosch BSG813 Series Use And Care Manual

Changing the dust bag

14
Replacing the MEGAfilt
If the dust bag change indicator lights up
brightly and constantly while the nozzle is not
on the carpet and the highest suction setting is
being used, you must:
a)check whether the nozzle, the suction pipe or
the hose are blocked.
b)sometimes the type of waste in the bag
nessitates the change even if the bag is not full.
Operate the dust compartment handle in the
direction of the arrow to open the dust
compartment cover.
Seal the MEGAfilt
the sealing strip and pull up to remove the bag.
Place a new MEGAfilt
holder and close the dust compartment cover.
!
Important
A MEGAfilt Super TEX dust bag or textile filter
®
must be properly in place or the dust compart-
ment cover will not close. Do not force the
cover if it does not close easily. Inspect the
bag installation and adjust it as needed.
Super TEX dust bag
®
Super TEX dust bag by pulling
®
Super TEX dust bag into the
®