Adjusting the motion sensor
The sensitivity of the sensor can be adjusted using the sensitivity
controller
. This affects the range and the size of the animal that
2
can be detected:
To detect small animals the size of a rodent (e.g. mice) turn the
sensitivity controller to the „max." position. The range for detecting
small animals like these is approx. 2 m.
If you only want to detect larger animals (e.g. dogs or foxes) and
not smaller animals, turn the sensitivity controller anticlockwise to-
ward the „min." mark. The motion sensor's
large animals is approx. 2 m.
Adjusting the signal frequency
The device has 5 different programmes to repel animals.
Programme 0
Programme 1
Programme 2
Programme 3
16 GB/IE
The device is switched off. The charging
function using the solar panel
charging cable
13.5 kHz–17.5 kHz (against rodents like
mice or rats)
15.5 kHz–19.5 kHz (against dogs and foxes)
19.5 kHz–23.5 kHz (against dogs, cats and
birds)
range for detecting
5
10
is activated.
13
or the USB