Sharp AN-SS2 Operation Manual page 14

Connecting with Bluetooth transmitter (pairing)
Pairing with Bluetooth transmitter
1. Connect the Bluetooth transmitter to a TV
etc. Set the "input select" switch to the
connected audio cable or optical cable.
2. Press and hold the PAIRING button on the
Bluetooth transmitter for about 2 seconds.
Bluetooth transmitter indicator blinks blue.
3. Press and hold the POWER button on
the sound partner for about 2 seconds to
turn it on.
When pairing is completed, you can hear the sound "CONNECTED"
z
from sound partner.
If you cannot pair automatically, please keep pressing the "Bluetooth"
z
button of the sound partner for about 2 seconds.
Notes:
The Bluetooth transmitter is only for the sound partner (AN-SS2 ). It
z
cannot connect to other devices.
If the connection between the supplied Bluetooth transmitter and
z
the sound partner does not work well, press and hold the Bluetooth
transmitter PAIRING button for about 10 seconds to reset, and try
again.
Indicator status:
Status
During pairing
Successful pairing
Connected
Unconnected
Status indicator (Blue)
Blinks once in every seconds.
Lights up for about 3 seconds.
Blinks once every 5 seconds.
Blinks twice every 5 seconds.
OPTICAL AUDI O
Pairing Button
Bluetooth transmitter
Indicator
PAIRING